Protective, regenerative or special treatmentsAging treatments

OLD

Chemical aging treatment for marbles and stone

Aging treatment for marble and polished stone.

OLD

The product

Is a chemical treatment specially designed to age all types of marble and natural stones susceptible to chemical attack by acids — such as limestones, sandstones, slates, etc. — in a fast and effective way. Once applied, Old chemically modifies the surface so that the treated stone acquires a surface roughness identical to that caused by the passage of time and weathering agents on materials exposed to the elements.

Thanks to its optimal formulation, high quality and high effectiveness, Old also generates an anti-slip effect on the stones to which it is applied. In this way, the treated surface loses its surface gloss and acquires roughness, thereby increasing the slip resistance coefficient of the surface.

Based on its excellent properties and the excellent results obtained on a wide range of substrates, Old is a very useful treatment for stairs, ramps and any access area with this type of flooring that presents a slipping hazard or where a decorative aged appearance with permanent durability is desired.

The treatment carried out with Old is irreversible, so the surface can only be restored to its original state by polishing.

  • Professional chemical aging agent
  • Suitable for interior and exterior.
  • Provides anti-slip protection.
  • High performance.
  • Irreversible.

OLD

Applications

Old can be used on all types of marble surfaces or calcareous derivatives where an aged appearance or an anti-slip finish is desired.

Likewise, Old can be used in restoration work to match areas where new pieces have been laid alongside old ones.

OLD

Application method

Depending on the degree of attack required, it can be used neat or diluted. Before applying Old, it is recommended to carry out a prior test to adjust the required degree of attack by modifying the dilution or the exposure time.

To apply Old, it is recommended to follow the steps below:

  • Initially, adjacent surfaces must be protected to avoid possible damage from splashes, particularly if they are metallic.
  • Next, apply a small amount of Old using a brush, roller or spray.
  • Then, leave to act for 5 – 15 minutes, depending on the degree of attack required (which will depend on the type of material).
  • Finally, wash the piece with plenty of water and allow to dry.

If dilution is required, it is recommended to add Old to the water and not the other way around.

OLD

Technical data

APPEARANCEDENSITYpHCOMPOSITION
Clear yellow liquid.1.180 ± 0.01 kg/L0 + 0.50Inorganic acids, wetting agents and corrosion inhibitors.

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito