Cleaners and drain openersDescalers
INCRUSCAL AGRO
Descaler for agricultural sprayers
Biodegradable cleaner – descaler for agricultural equipment.
INCRUSCAL AGRO
The product
Is an acidic cleaner-descaler based on 100% biodegradable organic acids and wetting additives, developed specifically for cleaning all types of agricultural and industrial sprayers, atomisers, and nebulisers.
Thanks to its elaborate composition, Incruscal Agro removes calcareous scale, salt residues derived from fungicide products or fertilisers, and solids caused by the crystallisation of herbicides, in a rapid manner, without having to resort to aggressive acid products. Incruscal Agro, thanks to its technology, promotes the natural dissolution of the aforementioned contaminants, restoring the spraying system to its original efficiency.
On one hand, Incruscal Agro restores the pumping system and pipework to their nominal flow rate and pressure. By removing the scale accumulated in them, the diameter of the pipelines is re-established, thus allowing the original flow rate sent by the pump to pass through, regardless of whether it is a diaphragm or piston type.
On the other hand, Incruscal Agro also conditions the spray nozzles, both ceramic and plastic, restoring the original spray pattern and, consequently, achieving more uniform treatments with greater efficacy.
This mode of action is carried out without attacking rubbers or plastics, or causing corrosion or oxidation, unlike other commercially available products of an acidic nature.
Can be used in any area, given that its components are 100% biodegradable and have low persistence in soils.
- Non-oxidising.
- Non-corrosive.
- 100% biodegradable.
- Removes all types of scale.
- Does not attack rubbers or plastics.
INCRUSCAL AGRO
Applications
Incruscal Agro is designed to be used in all types of agricultural or industrial equipment intended for the application of plant protection products, foliar fertilisers, and herbicides that, due to their use, present problems of scale, flow rate losses, or malfunction and require internal cleaning.
INCRUSCAL AGRO
Application method
- Add 100 L of water to the sprayer and start agitation.
- Add 5 L of Incruscal Agro and keep agitating while recirculating the mixture through the system.
- After 5 minutes, open the spray boom valves or atomiser or mist sprayer nozzles and empty the equipment completely.
- Rinse with 50 L of clean water.
INCRUSCAL AGRO
Technical data
| Appearance | Density | Ph | Composition |
|---|---|---|---|
| Transparent orange liquid | 1.8 ± 0.01 Kg/L | 2.5 ± 0.5 | Non-oxidising organic acids, surfactants, and wetting additives. |
Need advice about this product?
Contact our technical team to select the right product.