Cleaners and drain openersSanitizers

AMBISANIT OH

Environment and surface sanitiser specially designed for nebulisation

Hydroalcoholic sanitiser for environments and surfaces

AMBISANIT OH

The product

Is a sanitising product for environments and washable surfaces, based on alcohols, cationic surfactants and high-quality fragrances, suitable for application by nebulisation, a system that allows airless spraying, providing greater safety and better utilisation of the liquid inside compared to conventional aerosols.

Due to its formulation, Ambisanit OH rapidly sanitises surfaces without the need for subsequent rinsing.

Furthermore, its high sanitising power and balanced fragrance load allow the maintenance of environmental cleanliness in enclosed spaces, eliminating contaminants and providing a fresh and pleasant atmosphere.

Is compatible with the majority of washable surfaces found in any work environment, and can therefore be used on counters, door handles, computer peripherals, cabinets, footwear, vehicles…etc.

The product is presented "ready to use", so it does not require dilution prior to use.

  • Rapid evaporation.
  • Suitable for all surfaces.
  • No rinsing required.
  • Fresh and pleasant fragrance.
  • Ready to use.

AMBISANIT OH

Applications

AMBISANIT OH can be used in any situation where a high level of hygiene is required without resorting to aggressive products, such as offices, shops, homes, restaurants, vehicles, educational centres, etc.

AMBISANIT OH

Application method

AMBISANIT OH and AMBISANIT OH AER are supplied ready to use, so no prior dilution is required before use.

To sanitise environments:

With Ambisanit OH: spray or nebulise the product over the area to be treated following the guidelines set out in the table below and not exceeding a dosage of 0.5 g of product per cubic metre per day.

(To calculate the m3 of the area to be sanitised: Measure the distance between two adjacent walls and the height to the ceiling.

Then multiply the three values obtained).

The environmental sanitisation treatment can be carried out in one or several applications spaced over time, or alternatively complemented with a total discharge sanitising treatment. For example: 1 Deep sanitisation + 1 Partial sanitisation; 1 Deep sanitisation + 4 maintenance sanitisations…etc.

With Ambisanit OH Aerosol: spray the product over the area to be treated for a few seconds, bearing in mind that one container of Ambisanit OH Aerosol can treat an area of up to 160 m3.

To sanitise surfaces:

Spray/nebulise the product onto the surface to be sanitised at a distance of 30 cm.

Then allow to act until complete evaporation. (Approx. 30 seconds).

Additionally, to increase the homogeneity and evaporation speed of the sanitising treatment, wipe with a dry cloth.

Before applying the product to a delicate surface or textile, it is recommended to carry out a prior test on a less visible area to verify full compatibility of the product with the surface or textile.

It is recommended that the surfaces to be sanitised are completely clean. This increases the efficacy of the sanitising product.

AMBISANIT OH

Technical data

ReferenceDensityDensityPhComposition
Ambisanit ohColourless and translucent liquid with a fresh scent0.84 ± 0.01 Kg/L8.80 ± 0.5Alcohols (70%), Alkyldimethyl benzyl ammonium chloride, Fragrance and Excipients.
ReferenceDensityDensityPhComposition
Ambisanit oh aerosolColourless and translucent liquid with a fresh scent0.80 ± 0.01 Kg/L8.60 ± 0.5Alcohols (99%), Alkyldimethyl benzyl ammonium chloride, Fragrance and Excipients.

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito