Primers, coatings and sealantsWaterproofing Solutions

Imperlatex

Flexible acrylic waterproofer. Satin finish. Available in colours

Flexible acrylic waterproofer. Satin finish.

Imperlatex

The product

Is a single-component, water-based waterproofing coating, formulated with high-quality hybrid acrylic polymers of high elasticity in emulsion, developed for carrying out water and moisture protection work on all types of construction surfaces.

Once applied, it generates a totally opaque, continuous and water-impermeable membrane with excellent adhesion to the mineral and absorbent substrates commonly used in construction, with optimal elasticity and a pleasant satin surface finish. Thanks to its advanced formulation and the high quality of the resins used, Imperlatex is resistant to solar radiation and cracking, achieving optimal quality in the work carried out with high long-term durability.

In addition, Imperlatex has high abrasion resistance and trafficability. The careful selection of mineral fillers and additives gives the film great firmness and solidity against external aggressions and, additionally, allows the product to resist domestic cleaning products and makes the membrane totally permeable to water vapour, preventing condensation problems due to its use.

Is a thixotropic product. Its rheology allows easy application on all types of surfaces, whether horizontal or vertical, as the product does not sag. This fact, combined with its easy brushability, ensures excellent smoothness of application and control of the deposited thickness, characteristics that positively reduce operator fatigue and, consequently, optimise work execution times.

  • High crack resistance.
  • Optimal elasticity.
  • Excellent durability.
  • Thixotropic.
  • Trafficable.

Imperlatex

Applications

Imperlatex is especially recommended for carrying out all types of waterproofing work where a high-end, trafficable, elastic acrylic product with good resistance to standing water is required.

Typical examples of its use are: waterproofing of roofs, protection against water infiltration on terraces or repair of roof coverings, among others.

Imperlatex

Application method

Imperlatex is a ready-to-use product that does not require dilution prior to use. It is recommended to homogenize the product before application using a mixer at low speed to avoid air occlusion in the product.

Surface preparation:

Before applying Imperlatex, you must ensure that the substrate is sound, dry, clean and free of any trace of saltpetre, fungi, microorganisms, grease, release oils, and in general all types of contaminants that may hinder good adhesion of the product to the surface.

In the case of very smooth surfaces or where laitance layers exist (such as on new concrete and mortars), it is advisable to increase their porosity by cleaning with Limfa, followed by thorough rinsing with water and drying.

Application of Imperlatex:

  1. Check that the substrate has a temperature between 10 and 35ºC.
  2. Apply the product using a brush or roller, depositing an initial coat of approx. 0,7 Kg/m2.
  3. Embed a fibreglass mesh or veil onto the Imperlatex.
  4. Allow the application to dry for 12 hours.
  5. Apply a second coat of Imperlatex, preferably in a crossed direction with respect to the previous one, depositing a coverage of approximately 0,8 kg/m2.

Imperlatex

Technical data

APPEARANCEDENSITYpHCOVERAGESOLIDSDRYINGRECOATING
Opaque viscous liquid in grey, red, tile or white1.350 ± 0.01 g/cm38.5 ± 0.51,5 Kg / m2>50%Touch dry: 40 min. Trafficable: 3 days. Full cure: 7 days.Min: 12 h. Max: 48 h.
TOOL CLEANING
Water

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito