Cleaners and drain openersDegreasers – aqueous detergents

Lavamaq

Floor scrubber machine cleaner degreaser

Controlled-foam alkaline degreaser. Specially formulated for floor scrubber machines.

Lavamaq

The product

Is a high-concentration, controlled-foam alkaline degreaser based on a synergistic blend of inorganic hydroxides, wetting and degreasing surfactants, lime sequestrants, and solvents, specifically developed for the cleaning and degreasing of floors and pavements using a floor scrubber machine.

Its optimal composition and high concentration allow Lavamaq to remove all types of soiling, whether of vegetable, animal, or mineral origin, quickly and without affecting the surfaces commonly used in flooring. In this way, the degreasing surfactants, together with the inorganic hydroxides, emulsify, loosen, and solubilise greasy dirt rapidly, while the solvents contained in the formulation increase the efficacy and speed of action of the product. In addition, the latest-generation lime sequestrants eliminate lime marks caused by water and allow the product to be fully effective when diluted with all types of water, both hard and soft.

These qualities, together with its low foam formation, make Lavamaq the ideal product for use with a floor scrubber machine, avoiding the problems that foam generates in this type of equipment, resulting in a completely clean surface, free of residues and marks.

Contains neither dyes nor fragrances, so, in addition to being suitable for all types of industrial cleaning and maintenance operations, it is fully suitable for use in food industry facilities.

  • High concentration.
  • Cleans and degreases effectively.
  • Non-aggressive on materials.
  • Controlled foam.
  • Suitable for the food industry.

Lavamaq

Applications

Lavamaq is fully indicated for use in all types of floor and pavement cleaning operations where an effective product is required and where a floor scrubber machine may be used. For example: floor cleaning in mechanical workshops, maintenance of industrial facilities, cleaning of food industry premises or supermarkets, among others.

Lavamaq

Application method

Lavamaq is a concentrated product and must therefore be diluted before use. The dilution of the product must be adjusted to each particular case in order to optimise consumption.

As a guide, the following dilutions of Lavamaq in water should be used:

  • 5-10% for cleaning surfaces with a high soiling load.
  • 2-3% for cleaning surfaces with a moderate soiling load.
  • 1-1.5% for cleaning surfaces with a low soiling load.

Once the dilution of the product has been adjusted, introduce it into the floor scrubber machine, or alternatively apply by localised spraying.

Then carry out cleaning with the machine / allow to act for a few minutes and, finally, rinse with plenty of water.

Lavamaq must be stored in its original containers, properly closed and kept away from heat sources and/or direct sunlight. Lavamaq contains alkaline hydroxides and is therefore not suitable for use on aluminium surfaces. To obtain the best results in terms of performance and economy, it is recommended to adjust the dosage of the product to the type of surface to be cleaned and the soiling load present.

Lavamaq

Technical data

AppearanceDensityPhComposition
Yellowish-amber transparent liquid1.29 ± 0.01 Kg/L13.5 ± 0.50Inorganic hydroxides, wetting and degreasing surfactants, lime sequestrants, solvents, and excipients.

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito