Additives and release agentsPlasticizing and Fluidity-Enhancing Additives

NEOPLAST

Fluidifier and air-entraining agent for mortar

Plasticiser - Air-entraining agent for mortars. Ultra-concentrated.

NEOPLAST

The product

Is a highly concentrated plasticising and air-entraining additive for cementitious mortars, formulated on the basis of wetting surfactants and functional compounds, developed to improve the workability and fluidity of mortars.

Its high concentration is the differentiating characteristic from other plasticisers, directly influencing economy/profitability; with one litre, up to 8,000 kg of cement can be treated.

It reduces the amount of water required for mixing the treated mortars, ensuring that:

  • They do not suffer segregation (separation of water) when deposited in mixing troughs for a long period of time, improving the early strength of the material.
  • Their cohesion increases (internal bonding force and consistency), causing the material to sag less.
  • Water exudation during setting of the material is reduced, positively affecting its final appearance.

Also gives treated mortars greater docility and workability.

The material spreads much more easily, even those containing a low proportion of cement.

Due to the limited air occlusion caused by Neoplast when used as a mortar additive, the mortars acquire greater resistance to cracking caused by frost and/or weathering.

  • Reduces mixing water.
  • Increases plasticity.
  • Reduces water segregation.
  • Improves the strength of the material.

NEOPLAST

Applications

Neoplast can be used in any situation and mortar where it is necessary to improve workability and quality and, simultaneously, reduce defects that may arise due to the use of coarse sands or unfavourable climatic conditions:

  • Application of render and plaster coats,
  • Manufacture of stabilised mortars in combination with other additives, or general masonry work, among others.

NEOPLAST

Application method

Neoplast is a highly concentrated product that does not need to be diluted prior to use.

Add to the mixing water required for preparing the mortar; it must not be added to the dry mix.

The dosage to be used will be a maximum of 5 g of product per 25 kg of cement, depending on the desired degree of workability.

NEOPLAST

Technical data

AppearanceDensitypHComposition
Viscous amber liquid1.04 ± 0.01 Kg/L8.0+ 0.5Wetting surfactants, functional compounds and excipients.

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito