Lubricants and greasesDrilling fluids

METALOIL VERD

Green cutting fluid

Green synthetic cutting fluid with high antioxidant power.

METALOIL VERD

The product

Is a 100% synthetic, water-soluble coolant fluid developed to cool the parts and tools used in metal machining operations, such as centreless and centred grinding, tool sharpening, or operations in which strong anticorrosive protection is required.

Due to its composition, it dissipates the heat generated during machining, extending tool life and providing a finer finish on the workpieces while preventing wheel loading. Likewise, thanks to its high content of antioxidant agents and corrosion inhibitors, it is especially indicated for the protection of easily oxidisable ferrous parts. Furthermore, as it contains no oils, nitrites or chromates, it does not harm the operator's skin at working concentrations.

Contains antifoaming agents and bactericidal agents in its formulation, which, combined with its high concentration of sequestering agents, allows it to be diluted in water of any hardness in all proportions without foam formation, alteration of its properties, decomposition or the presence of bad odours over long periods of time. Likewise, the absence of lubricating oils means that working dilutions are completely transparent, improving visibility of the work being carried out.

Complies with the Herbert plate standard and CETA 20.545 on foam formation.

  • High cooling capacity.
  • Water-dilutable.
  • Optimal antioxidant characteristics.
  • Excellent durability.

METALOIL VERD

Applications

Metaloil Verd is especially indicated for use as a coolant fluid in all types of ferrous metal machining operations. For example: centreless or centred grinding, tool sharpening, profiling…etc.

METALOIL VERD

Application method

Metaloil Verd is a concentrated product and must therefore be diluted before use. To do so, it is recommended to carry out the dilution by adding Metaloil Verd to the required amount of water to prepare the mixture and then stirring.

The concentration of Metaloil Verd must be adjusted in this mixture according to the work to be carried out, bearing in mind that:

  • In grinding, drilling or turning operations, the recommended concentration of Metaloil Verd should be between 3 and 5%.
  • In severe machining operations (such as profiling), the recommended concentration of Metaloil Verd should be between 5 and 10%.

Once the working mixture has been prepared, fill the machine tank following the manufacturer's instructions. At this point, it is strongly recommended that the circuit and the machine tank are completely clean to avoid incompatibilities with other products and contamination that would negatively affect the properties and stability of the product.

Before using Metaloil Verd for the first time, a thorough cleaning of the tank and dosing circuit of the machine must be carried out. This procedure will prevent product stability problems and will help to keep it in optimum condition for longer. Metaloil Verd is not suitable for work with Magnesium, Titanium or yellow metal alloys.

METALOIL VERD

Technical data

AppearanceDensitySolubility in waterpH
Transparent yellow–orange liquid (in solution: green)1.080 ± 0.01 Kg/LSoluble in all proportions11.00 ± 0.5

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito