Auxiliary products and accessoriesRubbers and Latex for Modeling

MOLDEX

Pre-vulcanised latex.

Rubber latex for making elastic moulds.

Physical state
Opaque white-grey liquid
pH
Neutral
Formulation
Water

MOLDEX

The product

Highly elastic pre-vulcanised latex emulsion for making flexible moulds that accurately reproduce reliefs, objects and figures. Once cross-linked, the mould is durable and elastic, resists tearing and shrinkage, and reproduces the original profile without staining it or trapping air during application. It is single-component, requires no catalyst and cross-links quickly. It contains a low level of ammonia, used as a preservative.

  • With de-airing additives.
  • Fast crosslinking.
  • Single-component.
  • High elasticity.
  • Low odour.

MOLDEX

Applications

For applications requiring high-quality elastic moulds and accurate profile reproduction, including monument restoration, artificial-stone manufacture and decorative sculpture.

MOLDEX

Application method

Moldex is ready to use and must not be diluted.

  1. Brush a thin coat onto the surface to be reproduced.
  2. While the product is still wet, apply a fibreglass veil to reinforce the mould.
  3. Alternate layers of Moldex and fibreglass veil until the desired mould thickness is reached.
  4. Once cross-linked, remove the mould by gently peeling it from one edge.

MOLDEX

Technical data

Appearance
Opaque white-grey liquid
Density
1.005 ± 0.01 kg/L
Coverage
4–8 m²/L
pH
Neutral
Formulation
Water-based
Physical state
Opaque white-grey liquid
pH
Neutral
Formulation
Water

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito