Protective, regenerative or special treatments · Brightening, toning and color-restoring treatments
Protective, regenerative or special treatmentsBrightening, toning and color-restoring treatments
Protector and tone reviver for fired clay. Natural finish
Special anti-stain protector for fired clay and terracotta.
Fang
Is a solvent-based anti-stain protector and colour reviver for clay floors and wall coverings, such as: fired clay, terracotta or Catalan gres, among others, designed so that treated substrates do not absorb water, oils and other liquids by capillarity. In this way, treating them with Fang provides complete protection against moisture and oily stains, while enhancing and restoring their original tone.
Does not use resins to achieve this effect, so treated substrates retain their natural breathability and maintain their original texture. Furthermore, it does not add gloss, thus keeping the original anti-slip characteristics intact. Likewise, as it contains no resins in its composition, it does not crack, yellow or physically deteriorate over time, being especially durable against UV radiation.
Likewise, Fang has a low viscosity, which, combined with its 100% solvent composition, allows a high degree of penetration and protection in both low- and high-absorption substrates, whether in vertical or horizontal applications.
Due to its water-repellent and oil-repellent characteristics, Fang delays, on the one hand, the appearance of problems caused by water, such as: efflorescence, mould or algae and, on the other hand, facilitates the cleaning of all types of vegetable oil or grease stains.
Fang
Fang is suitable for use on any cladding of clay, terracotta, rustic gres, Catalan rasilla, ceramic flooring and, in general, absorbent clay surfaces, both vertical and horizontal.
Fang
Fang is a ready-to-use product and therefore does not require dilution prior to use. Before applying Fang, you must ensure that the surface to be treated is completely clean of dust, efflorescence, mould, grease, etc. Likewise, the surface must be completely dry with a residual moisture content below 5%. If the surface has a whitish appearance due to the presence of saline efflorescence, we recommend carrying out a prior cleaning with Limfa. If it has previously been waxed, all wax must be removed using Neogras 14. Once the surface is clean: 1. Apply the product with a brush, short-pile roller or a dry cloth and spread it evenly over the entire surface. 2. Then allow the product to dry, reapplying a new coat after 30–60 minutes if necessary. The surface will be completely dry and protected after 6 hours. On low-absorption substrates, it may be necessary to remove excess product by wiping with a clean, dry cloth.
Fang
| APPEARANCE | DENSITY | YIELD | COMPOSITION |
|---|---|---|---|
| Clear yellow liquid. | 0.935 ± 0.01 kg/L | 5-8 m2/L | Water-repellent and oil-repellent compounds, medium boiling point solvents, coalescents and excipients. |
Contact our technical team to select the right product.