Cleaners and drain openersDescalers
Radialimp
Radiator and cooling system cleaner
Radiator and cooling system cleaner.
Radialimp
The product
Is a detergent, descaling, and deoxidising liquid, specifically designed for deep cleaning of the cooling system of motor vehicles.
Its carefully developed formulation, formulated at a neutral pH, based on sequestering agents, dispersing components, and degreasing surfactants, allows the product to:
- Eliminate salt deposits generated in the radiator and engine block through vehicle use and degradation of the antifreeze fluid.
- Redisperse the sludge and rust accumulations generated inside the engine.
- Clean and remove oil residues and dirt generated by internal lubricant leaks or by head gasket failures.
Is completely harmless to the materials commonly used in cooling systems. Its triple action takes place without affecting the gaskets, hoses, or metals of the circuit. Furthermore, its low foam formation and controlled pH ensure that rinsing is extremely quick and that no residues are generated that could affect the antifreeze fluid.
- Concentrated.
- Disperses rust and scale.
- Does not attack rubbers, seals, or hoses.
- High effectiveness.
Radialimp
Applications
Radialimp is especially recommended for use both in maintenance cleaning prior to antifreeze fluid changes, and in deep cleaning of the cooling system due to the mixing of antifreeze and lubricant resulting from internal vehicle failures.
Radialimp
Application method
Radialimp is a concentrated product. A 0.5 L container allows cleaning and regenerating a radiator of up to 10 L capacity.
Drain the vehicle's cooling system by opening the radiator drain plug.
Close the drain plug and add water to the level between the maximum and minimum marks.
Shake the Radialimp container and add to the radiator.
Close the cap and start the vehicle with the heating set to maximum. Keep at idle for 20–30 minutes, so that the cooling system heats up and the contents of the radiator begin to circulate throughout the engine.
After this time, stop the vehicle and, once it has cooled down, remove the radiator cap and drain the system.
Then, with the system open, rinse the radiator with water.
Refit the radiator cap and refill with the required amount of new antifreeze.
Radialimp
Technical data
| Appearance | Density | Ph | Composition |
|---|---|---|---|
| Clear colourless liquid. | 1.02 ± 0.01 Kg/L | 10.5 ± 0.5 | Dispersing agents, sequestering agents, and controlled-foam degreasing surfactants. |
Need advice about this product?
Contact our technical team to select the right product.