Auxiliary products and accessoriesTools and repair equipment
PARCHE REPARADOR DE FUGAS
Self-adhesive patch for sealing cracks in pipes and tanks
Leak repair patch.
- Physical state
- Solid
PARCHE REPARADOR DE FUGAS
The product
PARCHE REPAR is a leak repair system for pipes, tanks and ducts, consisting of a fibreglass patch impregnated with a two-component epoxy resin. It combines a reinforcement backing with a resin that hardens after mixing its two components, forming a repair bonded to the treated surface.
It is designed to carry out localised repairs in a practical manner, adapting the patch to the affected area. Its format allows the leak point to be covered and the resin to be distributed over the fibreglass reinforcement, promoting contact with the substrate during application.
It adheres to a wide variety of materials, including PVC, rubber, metal, glass, wood, fibre, aluminium, ceramic, cement, copper, iron and various plastics. The quality of the repair depends on the material, the condition of the surface and adequate preparation, particularly the removal of dust, oil, corrosion and other residues.
The system offers resistance to most diluted chemical products, according to the original data sheet. Compatibility must be verified for each application, taking into account the product in contact, its concentration, the temperature and the operating conditions.
PARCHE REPAR allows maintenance tasks to be carried out in various professional and domestic environments. Application must be performed with the installation depressurised and respecting the hardening time before returning it to service.
- Localised leak repair.
- Resistant to diluted chemical products.
- Adhesion to multiple materials.
- Practical application without special equipment.
- Fibreglass reinforcement with epoxy resin.
PARCHE REPARADOR DE FUGAS
Applications
Localised repair of leaks in pipes, tanks and ducts, on materials compatible with epoxy resin.
Applicable in maintenance work in automotive, marine, industrial, water treatment, collective, swimming pool and domestic installations.
The original data sheet contemplates its use on drinking water lines, wastewater, gases, compressed air and fuels. For these applications, verify compatibility and current technical documentation in advance, as well as the installation requirements. For contact with drinking water, confirm the corresponding accreditation for the intended use.
PARCHE REPARADOR DE FUGAS
Application method
Preparation of the installation
Completely relieve the pressure from the pipe or element to be repaired. Ensure that the work area allows the intervention to be carried out without fluid escaping.
Preparation of the substrate
Clean the surface, removing dust, oil, corrosion and any residue that may hinder adhesion. Check the condition of the substrate before placing the patch.
Mixing the components
Without opening the bag, mix the two components for 2 minutes, working the contents to achieve a uniform mixture.
Placing the patch
Open the bag once the mixture has been made and place the patch over the area to be repaired. Also apply the excess resin contained in the packaging onto the patch, distributing it over the surface.
Hardening and return to service
Allow to harden for between 40 and 50 minutes at 29 °C. The time may extend to 2 hours depending on the ambient temperature. Before restoring service, check that the repair has hardened and verify its tightness in a controlled manner.
Use suitable disposable gloves for handling epoxy resins and avoid contact with skin and eyes. Consult the current label and safety data sheet before using the product.
Respect the hardening time and do not apply with the installation pressurised. Check the compatibility of the patch with the substrate and with the fluid that will be in contact with the repair.
For gas, fuel, compressed air or drinking water installations, confirm the suitability of the product and the intervention conditions with the manufacturer and the technical manager of the installation beforehand.
PARCHE REPARADOR DE FUGAS
Technical data
- Pressure resistance
- Up to 21 kg/cm2 on PVC pipes
Formats
Patches of 10 × 15 cm, presented in boxes of 10 units.
- Physical state
- Solid
Need advice about this product?
Contact our technical team to select the right product.