Cleaners and drain openersSilicone cleaners and paint strippers

Siloclean

Silicone, adhesive and resin residue remover. Available in liquid and aerosol

Cleaner for adhesive and silicone residues.

Watch video

Siloclean

The product

Is a remover of glue, adhesive and silicone residues, formulated using a synergistic mixture of fast-evaporating polar solvents, wetting agents and co-adjuvants.

After being applied, Siloclean is absorbed by the layer of glue, silicone or adhesive, softening it within a few minutes, allowing easy removal of the residue using only a scraper or spatula without affecting the surface paint and without damaging it.

Given its versatility and balanced strength, Siloclean is also effective for removing tar stains, permanent marker, candle wax, adhesive tape and grease stains, leaving surfaces completely clean, degreased and free of residues, as all its components evaporate rapidly.

Is suitable for application on a wide range of surfaces, such as: porcelain stoneware, ceramic, marble, granite, glass, enamelled metal, etc. When applied to plastic, a prior test must be carried out to check the compatibility of the product with the surface.

  • Excellent solvent power.
  • Easy to apply.
  • High effectiveness.
  • Fast evaporation.
  • Dries without leaving residues.

Siloclean

Applications

Siloclean can be used in all circumstances where it is desired to remove silicone, adhesive, ink or greasy dirt residues on all types of surfaces, such as: construction substrates, glass, plastics, or enamelled metal surfaces, after a prior compatibility test.

Siloclean

Application method

Siloclean is a ready-to-use product. To obtain an optimal result, it is recommended to initially remove as much surface residue as possible by mechanical means. Once this has been done:

  • Shake the Siloclean container and apply the product directly onto the residue to be removed.
  • Leave to act until softening or dissolution of the residue is observed. As a guide, the average action time may range between 1 and 10 minutes, depending on the consistency and type of silicone, adhesive or dirt to be removed.
  • Next, remove the residue with the help of a spatula or absorbent paper.
  • Finally, clean the surface carefully with soap and water.

Siloclean

Technical data

ReferenceAppearanceDensitypHViscosityYieldComposition
SilocleanColourless transparent liquid0.99 ± 0,01kg/L----< 100 cPVariablePolar solvents, wetting agents and co-adjuvants.

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito