Cleaners and drain openersMulti-purpose Cleaners
NEOFLASH AER
Surface cleaning and polishing foam
Foam cleaner and polisher in aerosol format.
- Physical state
- Liquid
- pH
- 8,5 ± 0,5
- Formulation
- Water
- Aerosol format
- Yes
NEOFLASH AER
The product
NEOFLASH is a foam cleaner and polisher, presented in aerosol form, developed to remove stains and improve the appearance of different surfaces. It combines cleaning action with a bright finish, making routine cleaning and maintenance tasks easier.
Its spray application allows the foam to be distributed over the area to be treated and then worked with a cloth or sponge, depending on the type of surface and the dirt present. This format facilitates both the cleaning of localised stains and the treatment of larger surfaces.
It is suitable for a wide variety of hard and smooth materials, including stainless steel, ceramic, porcelain, chrome, wood, skay, plastic, bodywork, and anodised or non-lacquered aluminium.
NEOFLASH can also be used for the localised treatment of stains on carpets and textiles, following a specific procedure of application, gentle rubbing, and complete drying.
For stubborn dirt, the operation can be repeated and cleaning reinforced with a damp sponge.
- Cleans and polishes in a single operation.
- Removes stains on multiple surfaces.
- Localised-application foam.
- Also usable on carpets and textiles.
- Convenient and practical aerosol format.
NEOFLASH AER
Applications
Cleaning and polishing of hard and smooth surfaces compatible with the product:
Stainless steel and chrome surfaces.
Ceramic and porcelain.
Wood and skay.
Plastics, bodywork, anodised aluminium, and non-lacquered aluminium.
Also indicated for the localised treatment of stains on carpets and textiles.
NEOFLASH AER
Application method
Preparation:
Shake the aerosol before use. If it has been stored at low temperature, allow it to reach room temperature naturally before using it.
Hard and smooth surfaces:
Spray at an approximate distance of 20 cm from the surface. Work the area with a cloth to remove dirt and product residue. When necessary, first rub with a sponge suitable for the material.
Carpets and textiles:
Spray onto the stain from an approximate distance of 30 cm. Rub gently and allow to dry completely.
Stubborn dirt:
Repeat the application and rub with a damp sponge.
NEOFLASH AER
Technical data
| Appearance | Density | Ph |
|---|---|---|
| Foam | 0.970 ± 0.010 Kg/L | 8,5 ± 0.5 |
- Physical state
- Liquid
- pH
- 8,5 ± 0,5
- Formulation
- Water
- Aerosol format
- Yes
Need advice about this product?
Contact our technical team to select the right product.