Primers, coatings and sealantsMarking paint

SEÑAPINT TRÁFICO

Two-component road marking paint

Two-component anti-slip paint for road marking.

SEÑAPINT TRÁFICO

The product

Is especially recommended for the execution of: pedestrian crossings, speed humps and speed reduction zones, directional arrows and road symbols, and even for all types of markings and signage in industrial areas.

Has ideal coverage, so typically a single coat is sufficient to obtain a high-quality result.

  • Excellent hardness and flexibility.
  • Fast drying.
  • Optimum abrasion resistance.
  • Anti-slip, SRT > 65.
  • High yield.
  • Possesses excellent performance on alkaline substrates such as concrete, being fully compatible with surfaces such as: bituminous pavements, asphalts, and even previously painted surfaces.
  • Provides excellent hardness, flexibility and levelling capacity, without sacrificing an anti-slip texture, achieving SRT (skid resistance test) values above 65 units, the highest existing classification.
  • Has optimum resistance to abrasion and wear from continuous traffic, as well as ideal behaviour against chemical agents and adverse atmospheric conditions.
  • Dries quickly, allowing an extremely fast return to service with no residual tack.

SEÑAPINT TRÁFICO

Applications

Señapint tráfico is especially recommended for use in the production of all types of markings and horizontal road markings subjected to heavy traffic.

SEÑAPINT TRÁFICO

Application method

Señapint tráfico must be applied on completely dry, clean surfaces free of dust, grease, dirt or poorly adhered particles. On previously painted surfaces, it will be necessary to completely remove any deteriorated or poorly adhering paint residues. On new concrete, it is recommended to first remove any curing compounds that may negatively affect the adhesion and performance of the coating.

Once the above has been confirmed, thoroughly homogenise the contents of the container by stirring with a mixer at low rpm.

Next, add one bag of 30% peroxide catalyst (250 g) per 15 kg container of product, mixing until a uniform preparation is obtained (catalyst dosage: 1.67%). (In low-temperature conditions, the proportion of catalyst may be increased to one and a half bags per container).

Then, apply the product using a squeegee, pouring, trowel or compatible airless equipment, ensuring that the material is deposited before the pot-life of the mixture expires.

Finally, clean the tools with nitro solvent.

SEÑAPINT TRÁFICO

Technical data

ReferenceAppearanceDensitypHViscosityYieldComposition
Señapint TráficoOpaque paste (various colours)1.9 ± 0.2kg/L----> 4000 cP1.5 – 2.5 Kg/m2Thermoplastic resins and mineral fillers.

Need advice about this product?

Contact our technical team to select the right product.

Request advice
Neoquimito
Neoquimito Neoquimito