Cleaners and drain openers · Silicone cleaners and paint strippers
Cleaners and drain openersSilicone cleaners and paint strippers
Ultra-powerful remover of coatings, adhesives and silicones.
Ultra-powerful remover of coatings, adhesives and silicones.
Siloclean plus
Is an ultra-powerful remover, developed specifically for the removal of all types of coatings, adhesives and silicones in a quick and simple manner.
Its composition, based on a synergistic blend of low molecular weight solvents with controlled evaporation, surfactants and co-agents, allows, with a single application, the removal of all types of adhesives, glues, silicones or acrylic, vinyl or epoxy coatings. Thus, localised application, or immersion of the contaminated parts, allows Siloclean Plus to rapidly soften the residue to be removed, detaching it from the parts almost instantly.
Versatile. Siloclean Plus is presented in liquid texture, so it can be applied by spraying or brushing in a localised manner, or alternatively used by direct immersion of the parts to be cleaned.
Has a controlled evaporation rate. That is, once applied, Siloclean Plus remains in contact with the residue to be removed for the time required to develop its action effectively, unlike other products on the market.
Suitable for all types of surfaces. Siloclean Plus is a multi-surface product, so it can be applied on wood, natural and artificial stone, or on metals. It should only be taken into account that its extremely high power may remove layers of paint or coatings underlying the residue to be removed.
Siloclean plus
Siloclean Plus can be used in all types of situations where an extreme-power solvent-based cleaner is required to effectively remove all types of adhesives, silicones or coatings, and which can be used both by immersion and by localised application.
Siloclean plus
Siloclean Plus is a ready-to-use product; do not dilute under any circumstances. To obtain an optimal result, it is recommended to apply the product directly onto the coating / dirt to be removed, eliminating as much surface residue as possible by mechanical means and, beforehand, making some cross-cuts to facilitate the action of the product.
Once this action has been carried out, apply Siloclean Plus directly onto the residue to be removed, allowing it to act until softening or dissolution of the residue is observed. As a guide, the average action time may range between 1 and 15 minutes, depending on the consistency and type of silicone, adhesive, glue or coating to be removed. Then remove the residue with the help of a spatula or absorbent paper. Finally, clean the surface carefully with soap and water and allow to dry.
Siloclean plus
Appearance: Colourless opalescent liquid.
Density: 1.20 ± 0.01 kg/L.
Viscosity: < 300 cP.
Coverage: Variable.
Composition: Low-molecular-weight solvent and surfactants.
Contact our technical team to select the right product.