Anti-stain protector for porous surfaces.
Stone protector is a natural effect stain protector that prevents the capillary penetration of oils, greases, sauces or food products residues, mineral oil… Its high concentration of active ingredient protects against the most penetrating and difficult to remove stains such as: grease, cooking oils, ketchup, coffee, etc.
The treated surfaces acquire an oil-repellent protection, preventing the appearance of oil and grease stains.
These special qualities make the product ideal to protect those materials that are frequently used and that must remain in optimum condition during their service life, such as kitchen worktops, marble or granite tables, restaurant floors, façades, etc.
For all types of absorbent surfaces to which oil repellent properties want to be added:
- Natural stone.
- Synthetic stone.
Mode of Application
Before applying the product, the surface must be clean and dry.
- Apply the product with a brush, a short haired roller or a cloth and spread it evenly over the entire surface until the same is properly saturated.
- For very porous materials is recommended to apply two wet-on-wet layers, with a maximum of 60 minutes between each application.
- Let the product react with the surface for a few hours. The surface will be fully protected within 24 hours of its application.
Stone Protector is a ready to use product, therefore it does not need to be diluted before use.
Para materiales muy porosos, aplicar 2 o 3 capas, dejando 30/60 minutos entre cada aplicación.
If the application of the product has been excessive regarding the absorbent characteristics of the surface, the excess must be removed using a cloth slightly dampened with the product within 30-40 minutes.
- Metallic containers of 0.5 L, 1, 5, 10 and 50 litres.